The installation process of laser cutting machine is as follows: 1. Preparation work. Before starting work, it is necessary to ensure that all components are intact and undamaged, and to check if the machine's power and grounding are functioning properly. At the same time, it is necessary to confirm whether the cables used have sufficient length. 2. Startup and trial operation. First, turn on the dimming system, voltage regulator, and host, then turn on the control system switch and observe if the voltmeter is in its stable position. Next, perform an empty transfer to check for any abnormalities in various parts. 3. Adjust the focal length. This step requires specific operations based on the processing size and material thickness. Generally speaking, the initial value is set at 5%, and then gradually adjusted until the effect is optimal. 4. Choose the appropriate positioning aperture. Select the appropriate Z-axis stroke and XY direction positioning ring diameter through the control system to meet the equipment's usage requirements. It should be noted that if the perforation function is used, this step is not required. After completing the above main settings, the fixture can be fixed and protective measures can be taken for the cut object. One step is to officially trigger the button for actual operation. Press the "Execute" button to achieve automatic continuous back and forth repetitive motion process (i.e. loop cutting). During this process, it is essential to ensure real-time monitoring and maintenance of the equipment in order to respond to unexpected situations. Pay attention to cleaning up waste or residual materials on site to ensure a clean and orderly working environment that complies with safety regulations.. There may be differences in the specific details of different models or brands of laser cutting machines. It is recommended to refer to the product manual or operate under the guidance of personnel.
{1}
{2}
{3}
{4}
{5}