The following precautions should be taken when cleaning the car mold machine:
1. * * Choose the appropriate cleaning agent * *. Alkaline cleaning solutions or solvents should be used, and corrosive chemicals such as strong acids and weak bases should be avoided. These chemicals can cause damage to machines and coatings. Considering cost factors, it is also possible to use a neutral and environmentally friendly mold cleaner diluted at room temperature.
2. Confirm operational safety: protective goggles, rubber gloves, masks, etc. must be worn to prevent liquids from splashing onto the skin or eyes; Optimize the working environment in a well ventilated environment and regularly replace the working environment to reduce the probability of safety hazards. If accidentally touched, immediately rinse the body contact area and clothing with plenty of water until thoroughly washed, and seek medical attention promptly to prevent injury! 3. Workpieces with severe oil stains on the surface of precision components such as cylinder heads should be treated by soaking, and excessive brushing should not be used to prevent damage to the protective film on their surface and affect the accuracy requirements; 4. For parts with special requirements, strict size control must be carried out according to customer drawings during sandblasting treatment to meet product standard requirements! 5. Keep the tools clean and tidy: Various cleaning tools must be kept dust-free and sharp. This will greatly improve the efficiency of effectively removing dust, dirt, and other debris from the dead corners of the various connections of the car shell plate structural components!. 6. After completing the work, it is important to promptly clean up the site and perform equipment maintenance and upkeep.
7. Attention should also be paid to details, such as some unconventional shaped areas that are difficult to clean, and small handheld vacuum cleaners can be used to assist in completing more detailed work; In addition, due to the easy occurrence of air holes and other phenomena at the seams between many body coverings, after careful cleaning, these areas should be covered with adhesive film materials to prevent accidental scratches and damage to other already intact parts during subsequent wiping work; Thoroughly inspecting and cleaning every corner as a whole is necessary to ensure that every vehicle delivered to customers is a zero defect product! In short, it is not an easy task to achieve complete cleanliness of the interior and exterior of a car. Not only does it require sufficient patience, but it also requires serious learning and mastery of more skills to ensure quality as a prerequisite before implementing any work, which is the pursuit goal, right?
In summary, it is the daily maintenance of automotive mold machines and local special care for key areas.
The above content is for reference only. It is recommended to adjust the precautions and method steps according to specific situations in practice.