Advertising engraving machine is a mechanical device used for engraving and cutting advertising materials. The operation process generally includes the following steps: 1. Preparation work: Firstly, it is necessary to fix the advertising materials on the workbench of the engraving machine to ensure the stability and safety of the materials. 2. Parameter setting: Based on the properties of the carving material and carving requirements, set the relevant parameters of the carving machine, such as carving speed, depth, tool selection, etc. 3. Create carving files: Use computer-aided design software (such as AutoCAD, CorelDRAW, etc.) to create carving files, which should include the patterns and text to be carved. 4. Convert file format: Convert the carving file into a format that the carving machine can recognize, such as G-code, H-code, etc. 5. Connect the engraving machine: Connect the engraving machine to the computer to ensure smooth communication between the two. 6. Start carving: Start the carving program on the computer, and the carving machine will carve according to the set parameters and carving files. 7. Check the carving result: After the carving is completed, it is necessary to check the carving result to see if it meets the requirements. If necessary, it can be trimmed and adjusted. 8. Cleaning the workbench: After carving is completed, it is necessary to clean the workbench, remove any remaining materials and waste, and keep the workbench tidy. The above is the general operation process of the advertising engraving machine. It should be noted that safety operating procedures must be followed during the operation process to ensure the personal safety of the operators.
{1}
{2}
{3}
{4}
{5}
{6}
{7}
{8}
{9}